Intermec EasyCoder 3240 Getting Started Manual page 47

EasyCoder 3240 Printer Getting Started Guide
Adjusting the Lateral Position of the Label Image
3-8
3. Adjust the lateral printhead knob until the image prints exactly where you
want it to on the label.
Front view
Front view
In the first part of this illustration, the label image starts out printing too
close to the outer edge of the label. By turning the lateral printhead knob
clockwise, the label image moves closer to the inner edge of the label. The
label image then appears exactly where you want it to, in the center of the
label, in the last part of the illustration.
4. Replace the media cover.
Co de 39 Co de 39
Printhead
Lateral
printhead
knob
Printhead
Lateral
printhead
knob
TOF
3240G.016