Intermec EasyCoder 3240 Getting Started Manual page 23

EasyCoder 3240 Printer Getting Started Guide
Loading Thermal Transfer Ribbon
Thermal transfer ribbon
10. Press the Feed/Pause button to advance the ribbon through the printer.
11. Close the printer. The printer is now ready to print labels.
1-14
P o
w e
r
A le
r t
E m
p t
y /
P a
u s
e
F e
e d
/ P
a u
s e
TTR assist
roller
8. Engage the printhead by rotating the head lift lever counterclockwise until
it locks.
9. To enable thermal transfer printing, set DIP switch 8 on the bottom bank of
switches to the on position. For help, see "Configuring the Serial Port" in
Chapter 2.
Note: When replacing the thermal transfer ribbon roll in the future, use the empty
ribbon supply core as the new empty ribbon core.
Empty ribbon
core
Printhead
Upper media
guide
Ribbon rewind
hub
Lateral printhead
adjust
Head lift
lever
Ribbon supply
hub
3240G.006