Standard Equipment And Specifications - RHINO TW60 Operator's Manual

Standard Equipment and Specifications

Horsepower Required (Min.)
Cutting Capacity (Max.)
Cutting Height
Safety Deflector
Cutting Width
Overall Width
Overall Length
Weight (Approx.)
Hitch
Blade Carrier
Gearbox Rating:
540 RPM
Output Shaft Diameter
Blade Tip Speed:
540 RPM
Driveline Size
Driveline Protection
Deck Thickness
Side Skirt
Tires & Wheel
Transport Width
Slip Clutch
Replaceable Skid Shoes
*Ratings based on actual field performance.
The Mower is designed for certain mowing applications and is rated to cut up to a specific size
vegetation (see Mower Standard Equipment and Specifications). DO NOT use this mower to cut
vegetation above the Mower's rated capacity or to cut any type of non-vegetative material. Only
operate this Mower on a properly sized and equipped Tractor. Operating this Mower in an
application for which it is not designed and/or operating the Mower with the wrong size Tractor can
cause Mower component damage and equipment failure resulting in possible serious injury or
death.
(SGM-14)
TW6072 05/05
© 2005 Alamo Group Inc.
OPERATION
30 HP
2"
2" Min.
Std.
60"
67-1/4"
108"
843 lbs.
CAT I-II
Pan
110 HP*
2"
12,469 FPM
Cat 4
Slip Clutch
10 Ga.
1/4" x 10"
Laminated
67-1/4"
Std.
Std.
Operation Section 4-3