Standard Equipment And Specifications - RHINO RX5 Operator's Manual

Standard Equipment and Specifications

1.
Horsepower Required
Cutting Capacity (Max.)
Cutting Height (Min.)
Safety Deflector
Cutting Width
Overall Length
Weight (Approx.)
Hitch
Blade Carrier
Blade Tip Speed (FPM)
Gearbox Rating:
540 RPM
Output Shaft Diameter
Driveline Size
Deck Thickness
Side Skirt
Transport Width
*Ratings based on actual field performance.
The Mower is designed for certain mowing applications and is rated to cut up to a specific
size vegetation (see Mower Standard Equipment and Specifications). DO NOT use this
mower to cut vegetation above the Mower's rated capacity or to cut any type of non-
vegetative material. Only operate this Mower on a properly sized and equipped Tractor.
Operating this Mower in an application for which it is not designed and/or operating the
Mower with the wrong size Tractor can cause Mower component damage and equipment
failure resulting in possible serious injury or death.
RX5-RX6 02/10
© 2010 Alamo Group Inc.
OPERATION
RX5
30 Min. HP
1"
1"
Std. Front, Metal Band Rear
60"
128
500 lbs.
CAT I (lift)
Pan
12,469
60 HP*
1-9/16"
CAT 3
11 Ga.
6-7/8"
67"
Operation Section 4-3
RX6
30 Min. HP
1"
1"
Std. Front, Metal Band Rear
72"
128
675 lbs.
CAT I (lift)
Pan
14,930
60 HP*
1-9/16"
CAT 3
11 Ga.
6-7/8"
79"
(SGM-14)