Standard Equipment And Specifications - RHINO SE42 Operator's Manual

Standard Equipment and Specifications

1.
Horsepower Required (Min.)
Cutting Capacity (Max.)
Cutting Height
Safety Deflector
Cutting Width
Transport Width
Overall Length
Weight (Approx.)
Hitch
Blade Carrier
Gearbox Rating:
540 RPM
Output Shaft Diameter
Blade Tip Speed:
540 RPM
Driveline Size
Deck Thickness
Side Skirt
*Ratings based on actual field performance.
The Mower is designed for certain mowing applications and is rated to cut up to a specific
size vegetation (see Mower Standard Equipment and Specifications). DO NOT use this
mower to cut vegetation above the Mower's rated capacity or to cut any type of non-
vegetative material. Only operate this Mower on a properly sized and equipped Tractor. Operating this Mower
in an application for which it is not designed and/or operating the Mower with the wrong size Tractor can cause
Mower component damage and equipment failure resulting in possible serious injury or death.
SE42 03/08
© 2008 Alamo Group Inc.
OPERATION
15 HP
1"
1-1/2" Min.
Std.
42"
45-1/4"
76-1/2"
305 lbs.
CAT I
Pan
30 HP
1-9/16"
11,459 FPM
Cat 3
11 Ga.
11 Ga. x 6"
Operation Section 4-3
(SGM-14)