Standard Equipment And Specifications - RHINO FC-0007 Operator's Manual

Standard Equipment and Specifications

Horsepower Required
Cutting Capacity (Max.)
Cutting Height
Safety Deflector
Cutting Width
Overall Length
Weight (Approx.)
Hitch
Blade Carrier
Blade Tip Speed (FPM)
Gearbox Rating:
540 RPM
Output Shaft Diameter
Driveline Size
Deck Thickness
Side Skirt
Transport Width
Jack Stand
*Ratings based on actual field performance.
The Mower is designed for certain mowing applications and is rated to cut up to a specific size
vegetation (see Mower Standard Equipment and Specifications). DO NOT use this mower to cut
vegetation above the Mower's rated capacity or to cut any type of non-vegetative material. Only
operate this Mower on a properly sized and equipped Tractor. Operating this Mower in an
application for which it is not designed and/or operating the Mower with the wrong size Tractor can
cause Mower component damage and equipment failure resulting in possible serious injury or
death.
(SGM-14)
SE6 05/05
© 2005 Alamo Group Inc.
OPERATION
SE6
30-50 HP
1"
1-7/8" Min.
Std.
72"
107-3/4"
728 lbs
CAT I (lift), Clevis (pull)
Pan
14,930
65 HP*
1-9/16"
Cat 3
10 Ga.
10 Ga. x 8"
78-5/8"
Std. (pull)
Operation Section 4-3