Standard Equipment And Specifications - RHINO NITRO FN20 Operator's Manual

Standard Equipment and Specifications

1.
Cutting Width
Transport Width
Overall Width
Overall Length
Cutting Height
Hitch
Blade Overlap
Blade Carrier
HP Required (Min.)
Gearbox Rating
Power Divider
Center Wing
Gearbox Limited Warranty
Output Shaft Diameter
Blade Tip Speed:
Center 540 RPM
1000 RPM
Wings 540 RPM
1000 RPM
Cutting Capacity (Max.)
Driveline Size
Main
Wings
Driveline Limited Warranty
Driveline Protection
Deck Thickness
Side Skirts: Replaceable
Replaceable Skid Shoes
Wing Flex
Deck Rings
Safety Deflectors
Tractor Static Vertical
Drawbar Load Rating (Min.)
Weight (Approx.)
* With front and rear double chain guards, 6 foam-filled used airplane tires, main driveline and dishpan blade carriers.
*Safety Deflectors are standard equipment. Single and double chain guards are available as extra equipment at extra cost.
Rhino recommends mowers be equipped with deflectors or double chain guards for all mowing purposes. Single chain
guards may be used for agriculture purposes only and are specifically not recommended for highway, right-of-way, parks or
greenbelt mowing.
**Ratings based on actual field performance.
*** Lowest cutting height obtained by raising side skirt and center skid shoes as described in Section 7.3.
FN20/FN14 NITRO 02/10
© 2010 Alamo Group Inc.
OPERATION
FN20 NITRO
240"
115"
248"
216"
1/2"***-14-3/4"
Pull
6"
Reinforced Pan or Bar
80 HP
EXTRA EQUIPMENT
325 HP Open or Closed Center Three-Spool Valve
285 HP Valve Mounting Kit
5 year Ball Hitch
2-9/16" Pintle Hitch (Requires Drawbar Modification)
Baffle Kit Assembly
16,328 FPM Auxiliary Wheels Spindle Kit (For Dual Wheels on
15,994 FPM Wings)
16,328 FPM Shredding Kit (Bar Carrier Units Only)
15,994 FPM
4-1/2" OPTIONAL EQUIPMENT
Single or Double Front & Rear Chain Guards
CAT 6 HD 540 or 1000 RPM
CAT 6 HD Constant Velocity or Non C/V Main Driveline
2 Year Pan or Bar Blade Carriers
Slip Clutch Laminated, Foam-Filled Used Airplane, Used
10 Ga. Plane, Implement, or Recapped Used Airplane Tire
1/4"x10-1/2" or Wheel
Std. Center and Wings
90 Degrees up, 22 Degrees Down
Standard
Standard
3100 lbs. * 2900 lbs. *
7745 lbs. * 7600 lbs. *
Operation Section 4-3
FN14 NITRO
162"
106"
170"
216"
1/2"***-14-3/4"
Pull
6"
80 HP
Standard
Standard