Standard Equipment And Specifications - RHINO SX15 Operator's Manual

Standard Equipment and Specifications

1.
Horsepower Required
Cutting Capacity (Max.)
Cutting Height
Safety Deflector
Cutting Width
Overall Length
Weight (Approx.)
Hitch
Blade Carrier
Blade Tip Speed (Center, 540 RPM)
Blade Tip Speed (Wings, 540 RPM)
Gearbox Rating
Power Divider
Center and Wings
Output Shaft Diameter
Driveline Size (Main)
Driveline Size (Wings)
Deck Thickness
Side Skirt
Jack Stand
Overall Width
Blade Overlap
Transport Width
Wing Lift Hyd.
Wing Flex (Degrees)
Replaceable Skid Shoe
*Ratings based on actual field performance.
The Mower is designed for certain mowing applications and is rated to cut up to a specific
size vegetation (see Mower Standard Equipment and Specifications). DO NOT use this
mower to cut vegetation above the Mower's rated capacity or to cut any type of non-
vegetative material. Only operate this Mower on a properly sized and equipped Tractor.
Operating this Mower in an application for which it is not designed and/or operating the
Mower with the wrong size Tractor can cause Mower component damage and equipment
failure resulting in possible serious injury or death.
SX15 01/09
© 2009 Alamo Group Inc.
OPERATION
SX15
50 HP
2"
1"-15"
Std.
180"
176"
4281 lbs
Clevis
Pan
15,268 FPM
15,395 FPM
160 HP
100 HP
2"
Cat 5
Cat 4
10 Ga.
1/4" x 9"
Std.
187"
6"
96"
Std.
90 Degrees Up - 22 Degrees Down
Std.
Operation Section 4-3
(SGM-14)