Standard Equipment And Specifications - RHINO EC72 Operator's Manual

Standard Equipment and Specifications

1.
Horsepower Required
Cutting Capacity (Max.)
Cutting Height
Safety Deflector
Cutting Width
Overall Length
Weight (Approx.)
Hitch
Blade Carrier
Blade Tip Speed (FPM)
Gearbox Rating:
540 RPM
Output Shaft Diameter
Driveline Size
Deck Thickness
Side Skirt
Transport Width
*Ratings based on actual field performance.
The Mower is designed for certain mowing applications and is rated to cut up to a specific
size vegetation (see Mower Standard Equipment and Specifications). DO NOT use this
mower to cut vegetation above the Mower's rated capacity or to cut any type of non-
vegetative material. Only operate this Mower on a properly sized and equipped Tractor. Operating this Mower
in an application for which it is not designed and/or operating the Mower with the wrong size Tractor can cause
Mower component damage and equipment failure resulting in possible serious injury or death.
EC72 03/08
© 2008 Alamo Group Inc.
OPERATION
EC72
30 Min. HP
1"
1" Min.
Std. Front, Metal Band Rear
72"
128
675 lbs
CAT I (lift)
Pan
14,930
60 HP*
1-9/16"
Cat 3
11 Ga.
6-7/8"
79"
Operation Section 4-3
(SGM-14)