Malfunction Code And Defective Condition - Suzuki VL1500K5 Supplementary Service Manual

44 VL1500K5 ('05-MODEL)

MALFUNCTION CODE AND DEFECTIVE CONDITION

DETECTED
DTC No.
C00 NO FAULT
CKP sensor
C12
P0335
IAP sensor
C13/C17
P1750/P0105
TP sensor
C14
H
P0120
L
EOT sensor
C15
H
P0115
L
C18 Decomp. relay Decomp relay signal is not input to
P1751
C19 Starter relay
P0615
DETECTED FAILURE CONDITION
ITEM
The signal does not reach ECM for 3
sec. or more, after receiving the starter
signal.
The sensor should produce following
voltage.
0.1 V sensor voltage < 4.8 V
In other than the above range, C13
(P1750) or C17 (P0105) is indicated.
The sensor should produce following
voltage.
0.1 V sensor voltage < 4.8 V
In other than the above range, C14
(P0120) is indicated.
Sensor voltage is higher than specified
value.
Sensor voltage is lower than specified
value.
The sensor voltage should be the fol-
lowing.
0.1 V sensor voltage < 4.6 V
In other than the above range, C15
(P0115) is indicated.
Sensor voltage is higher than specified
value.
Sensor voltage is lower than specified
value.
ECM.
Starter relay signal is not input to
ECM.
–––––––––––
CHECK FOR
–––––––––––
CKP sensor wiring and mechan-
ical parts.
CKP sensor, lead wire/coupler
connection.
IAP sensor, lead wire/coupler
connection.
TP sensor, lead wire/coupler
connection.
TP sensor circuit shorted to
VCC or ground circuit open.
TP sensor circuit open or
shorted to ground or VCC circuit
open.
EOT sensor, lead wire/coupler
connection.
EOT sensor circuit open or
ground circuit open.
EOT sensor circuit shorted to
ground.
Decomp. relay, lead wire/coupler
connection.
Starter relay, lead wire/coupler
connection.