Engine Disassembly And Reassembly - Suzuki VL1500K5 Supplementary Service Manual

ENGINE DISASSEMBLY AND
REASSEMBLY
The engine disassembly and reassembly procedures are differ-
ent from those of the VL1500K4 ('04-MODEL). For details other
than the following parts, refer to the VL1500 Service Manual.
GEAR POSITION SWITCH REMOVAL
• Remove the gear position switch 1.
GEAR POSITION SWITCH REASSEMBLY
• Apply SUZUKI SUPER GREASE "A" to the O-ring.
• When installing the gear position switch 1, align the pin A
with the hole B in the gearshift cam retainer 2.
'
Use a new O-ring to prevent oil leakage.
( 99000-25030: SUZUKI SUPER GREASE "A" (USA)
99000-25010: SUZUKI SUPER GREASE "A" (Others)
EOT SENSOR REMOVAL
• Place an oil pan below the EOT sensor.
• Disconnect the EOT sensor coupler 1 and remove the EOT
sensor 2.
$
Do not remove the EOT sensor when the engine is hot.
EOT SENSOR REASSEMBLY
• Install a new gasket washer 1.
• Tighten the EOT sensor to the specified torque.
'
Take special care when handling the temperature sen-
sor. It may cause damage if it gets a sharp impact.
& EOT sensor: 22 N·m (2.2 kgf-m, 16.0 lb-ft)
VL1500K5 ('05-MODEL) 17