Four winns V Series Owner's Manual page 168

4) Lower the adjustable supports using the button-
release. The button-release lets you slide the inner
and outer tube to longer or shorter settings for a
snug or loose fit. Doing so may make attaching the
top canvas to the bow easier. See Figure O10.
Button-Release
Figure O10: Adjustable Bow Support Poles
5) Place the canvas top over the bow. Wrap the
zippered-flap portion of the top around the bow
and zip securely in place. See Figure O11.
Flap
Bow
Figure O11: Zippered-Flap Portion of Canvas Top
6) Raise the adjustable supports using the button-
release in order to make the canvas top taut. See
Figures O10 and O12.
Weather Covers - Section O
Canvas should be snug. If overly taut or
extremely tight, canvas could tear or pull at
seams.
To install the sides & aft curtains:
1) Lower the adjustable supports using the button-
release. The button-release lets you slide the inner
and outer tube to longer or shorter settings for a
snug or loose fit. Doing so may make attaching the
sides & aft canvas to the boat easier. See Figure
O9.
2) Valances, small areas of canvas curtain, are used
to attach the side curtains to the boat. The valanc-
es slide through a track mounted on the hard top.
The side curtains are then attached to the valanc-
es using zippers. See Figure O13.
Zipper
3) Starting at the top, start each zipper.
4) When all zippers have been started, complete
zipping.
5) Snap the side curtains to the boat.
6) Zip the aft curtain to the canvas top, starting
at one end. See Figure O14.
Figure O12: Canvas Top
NOTICE
Track
Zippered
Valence
Figure O13: Side Curtain Valence
Owner's Manual Page 166