Using Your Rotisserie - KitchenAid KFRU368T Installation Instructions And Use & Care Manual

Kitchenaid outdoor grills freestanding and built-in
Hide thumbs Also See for KFRU368T:
Table of Contents

Advertisement

Available languages

Available languages

Manually lighting the side burner
1. Do not lean over the grill.
2. Remove the manual lighting extension (see following
illustration) and attach a match to the split ring.
Portable grills - right-hand
cabinet drawer
3. Strike the match to light it.
4. Guide the match to the burner you wish to light.
A
B
A. Rotisserie motor
B. Spit rod
C. Rotisserie fork
D. Rotisserie burner
For best cooking results, do not use main grill burners when
using the rotisserie.
The rotisserie system is designed to cook food from the rear
using intense, searing infrared heat.
NOTE: To avoid product damage when not using the rotisserie,
remove motor and store indoors. Remove spit rod and forks.
Store out of reach of children.
To Use:
1. Remove warming shelf.
2. Mount rotisserie motor on the grill's mounting bracket.
Position it securely into support bracket slots. Plug single-
prong plug 500 mAmp transformer assembly into rotisserie
motor.
A
A. Rotisserie motor
B. Single-prong power cord
18
Built-in grills - right-hand side
flange

Using Your Rotisserie

C
D
B
5. Push in and turn the burner knob to LITE/HI for the burner
closest to the lit match. The burner will light immediately.
When burner is lit, turn knob to desired setting.
6. Repeat steps 2 through 5 for each burner.
7. Remove match and replace manual lighting extension inside
the cabinet drawer.
IMPORTANT:
If burner does not light immediately, turn the burner knob to OFF
and wait 5 minutes before relighting.
If any burners do not light after attempting to light them manually,
contact the KitchenAid Customer eXperience Center. See the
"Assistance or Service" section.
3. To load the spit rod, slide one of the rotisserie forks onto the
spit rod with prongs facing inward.
4. Push spit rod through the center of the food, then slide
second rotisserie fork into position.
5. Center the food and rotisserie forks on spit rod and tighten
wing nuts on the rotisserie forks. If necessary, secure loose
food portions with butcher's string only.
6. Once the food is positioned on spit rod, place pointed end of
rod through the hole in the left side of the grill and into the
rotisserie motor, then lower the notched end of the spit rod
onto the support bracket on the opposite side.
A
A. Pointed end of spit rod
B. Notched end of spit rod
7. Check that food is centered with the rotisserie burner. If not,
loosen wing nuts, reposition food and retighten wing nuts.
B

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kfru488tKbnu367tKbnu487t

Table of Contents