Style 2 - Built-In Outdoor Grill Installation - KitchenAid KFRU368T Installation Instructions And Use & Care Manual

Pipe-joint compounds suitable for use with Natural gas
must be used. Do not use TEFLON
C
D
A. Grill gas pipe
B. New ANSI Z21.54 certified gray hose
C. Rear of grill
D. To Natural gas supply
2. Open the manual shutoff valve in the gas supply line. The
valve is open when the handle is parallel to the gas pipe.
A
A. Closed valve
B. Open valve
3. Test all connections by brushing on an approved
noncorrosive leak-detection solution. Bubbles will show a
leak. Correct any leak found.
4. Go to "Check and Adjust the Burners" section.
Plug in Grill
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
1. Plug into a grounded 3-prong outlet.
†®TEFLON is a registered trademark of E.I. Du Pont De Nemours and Company.
12
®† tape.
A
B
B

Style 2 - Built-in Outdoor Grill Installation

WARNING
Excessive Weight Hazard
Use two or more people to move and install grill.
Failure to do so can result in back or other injury.
Unpack grill. Remove all packaging materials and remove grill
from carton.
Move grill close to desired outdoor location.
Open the hood.
Remove Packaging Material Inside the Grill
1. Cut the tiedowns holding the grates together.
2. Remove rotisserie skewer (on some models), warming shelf
and grill grates from inside the grill and remove packaging
material.
3. Remove foam block and wrap from inside the grill.
A
A. Foam block
B. Foam wrap
4. Replace the grill grates.
5. Place warming shelf on brackets as shown.
A
A. Warming shelf brackets
B. Warming shelf
6. Install rotisserie mounting bracket using 2 screws.
A
A. 2 bracket screws
B. Rotisserie bracket
7. Dispose of/recycle all packaging material.
B
B
A
B