Picot Edge - Bernina activa 125 Owner's Workbook

M
ASTERING
Y
OUR
BERNINA
®
Owner's manual pg.____
• Select the Vari-Overlock stitch #3 - SW 4-5mm and SL 1.5mm.
• Fold under one 6" edge about ½" and press.
• Place fabric to the left and position it under the foot so that the stitch, when it swings to the right,
will just pass over the folded edge.
• On knit fabrics the surplus can be trimmed from the wrong side close to the stitch.
• On woven fabrics it is advisable to first sew a row of small zigzag stitches about ¼" from where
the picot edge will be. Then you will be able to trim close to these stitches after the picot has
been stitched.
• Trim and mount the sample.
This stitch is suitable only for fine, soft fabrics and is ideal for lingerie and nightwear.
BERNINA
M Y
ASTERING OUR
BERNINA

PICOT EDGE

Fabric: Lightweight single knit cotton, 6" x 4"
Needle: 80/12 Universal
Thread: All-purpose sewing thread
Presser Foot: Reverse Pattern Foot #1
1/10/02
®
®
activa 125/135 PE/145
activa 125/135 PE/145/43