Installing The Rear Shock Absorber Assemblies; Removing The Swingarm - Yamaha YP250R 2005 Service Manual

REAR SHOCK ABSORBER ASSEMBLIES AND
1
2
5
1
4
1
2
3
2
SWINGARM
EAS06990
INSTALLING THE REAR SHOCK
ABSORBER ASSEMBLIES
1. Install:
• rear shock absorber upper nuts 1
• rear shock absorber lower bolts 2
EAS07030

REMOVING THE SWINGARM

1. Stand the vehicle on a level surface.
WARNING
Securely support the vehicle so that there
is no danger of it falling over.
NOTE:
Place the vehicle on a centerstand so that the
rear wheel is elevated.
2. Remove:
• rear wheel axle nut 1
• brake hose holder 2
• rear brake caliper 3
• rear shock absorber lower bolt (right) 4
• rear fender bracket 5
NOTE:
Do not squeeze the rear brake lever when
removing the rear brake caliper.
3. Remove:
• swingarm
4 - 72
CHAS
32 Nm (3.2 m · kg, 23 ft · lb)
18 Nm (1.8 m · kg, 13 ft · lb)