Advertisement
Now let's mount the cowl.
32. Before mounting the cowl place four strips of masking tape on the fuselage as shown
and use a felt tipped marker to mark the location of the bolt holes in the cowl mounting
tabs.
33. Place the canopy/hatch onto the fuselage to aid in alignment. Peel the tape back just
behind the F1 former and place the cowl into position. You will need to open the cowl to
clear the cylinder head of the engine. Place your spinner (4 inch) on the motor to help
align with cowl. View the cowl from several angles to insure that it is positioned properly.
When satisfied put the four tape strips back into position and drill a 1/8" hole at the
location of each of the 4 ink marks.
28
Advertisement
