Advertisement
28. Install your choice of throttle servo in the location in the bottom of the motor box. If
using a tuned pipe or canister you will need to install a couple of 3/8" hardwood rails to
elevate the servo and prevent it from being too close to the header. If using a standard
muffler simply bolt the servo into the pre-cut hole. You will need to fabricate your own
linkage to accommodate your choice of engine. I used a short length of 2-56 threaded rod
and 2-56 ball links.
29. Assemble and install the gas tank in front of the wing tube socket using nylon cable ties
through the mounting tabs and around the tank. I suggest using a piece of foam under the
tank.
26
Advertisement
