Transfer A Call; Forward All Calls - Cisco 7942 Quick Reference Manual

Transfer a Call?

Forward All Calls?

When the call connects,
press Confrn again to add
the new party to the
conference call.
Repeat these steps to add
parties to the conference
call.
••During a call, press the
Trnsfer softkey. Doing so
automatically puts the call on
hold.
••Dial the number or office
extension to which you want
to transfer the call.
••When the call rings on the
other end, press Trnsfer
again. Or, when the party
answers, announce the call
and then press Trnsfer.
To forward all of your
incoming calls to
another number:
••Press the CFwdAll softkey.
You will hear two beeps.
••Enter the number to which
you want to forward all of
your calls. Enter the number
exactly as you would if you
were placing a call to that
number (i.e dial "9" first if an
external call).
••After you enter the
number, you will hear two
beeps.
••The LCD screen displays a
message confirming the
number to which your calls
If necessary, press end
call and then the Hold
button to return to the
original call.
Note To cancel call
forwarding, press the
CfwdAll softkey.
••You can use call
forwarding to send your
incoming calls to another
Cisco IP Phone or to a
traditional phone.
••If call forwarding is
active and there is no
answer at the forwarded
number (by a person,
answering machine, or
voice mail system), the
call will be redirected to
your voice mail system.
••You can set up call
forwarding when you are