Changing The Brightness Of The Display Window; Using The Sleep Timer - JVC DD-3 Instructions Manual

Changing the brightness of
the display window
Press [DIMMER].
• Each time you press [DIMMER], the display
changes in the display window as follows.
- "DIMMER 1"
The display window becomes darker than the
normal display brightness.
- "DIMMER 2"
The display window becomes darker than
"DIMMER 1".
- "DIMMER AUTO"
When a video disc/file is played back, the dis-
play window becomes darker automatically.
- "DIMMER OFF"
The normal display brightness is restored.
For the locations of the remote
control buttons, refer to page 16.

Using the sleep timer

When the time you specify elapses, the main unit
automatically turns off.
Press [SLEEP].
• Each time you press [SLEEP], the time indicated
in the display window changes. You can set the
time to 10, 20, 30, 60, 90, 120 or 150 minutes.
Example : Display when the sleep timer is set
to 60 minutes
NOTE
• When the sleep timer is activated, the display
window becomes darker automatically.
Changing the remaining time
Press [SLEEP] repeatedly to select the
time again.
Confirming the remaining time
Press [SLEEP] once.
Canceling the sleep timer
Press [SLEEP] repeatedly until
"SLEEP" disappears.
NOTE
• Turning off the main unit cancels the sleep timer.
18