JVC DD-3 Instructions Manual page 97

Network media system
Hide thumbs Also See for DD-3:
Table of Contents

Advertisement

Assembling the speaker stands (DD-3)
The speakers for DD-3 must be assembled to the speaker stands before the speakers can be connected to
the subwoofer. Follow the diagrams below.
Left and right speakers
Use the supplied M4 x
16-mm screws (3) to fasten
each speaker to its speaker
stand.
Left/right speaker cable
(supplied)
Center surround speaker
Black line
Use the supplied
M5 x 14-mm screws
(2) to fasten the
speaker stand.
■ CAUTION
• The left and right speakers and center surround
speaker for DD-3 can be installed on a wall.
• Be sure to have the speakers installed on the
wall by qualified personnel. Bottom covers (2)
are supplied with DD-3 for installing the left and
right speakers on the wall.
Affixing the bottom covers to the left and
right speakers
Left/right speaker
(bottom view)
Peel off the sheet from the bottom cover, and
then affix the bottom cover to the left/right
speaker.
• DO NOT install the speakers on the wall by your-
self to avoid unexpected damage from them fall-
ing off the wall due to incorrect installation or
weakness in wall structure.
• Care must be taken in selecting a location for
speaker installation on a wall. Injury to personnel
or damage to devices may result if the installed
speakers interfere with daily activities.
Bottom cover (for
wall installation)
8

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents