Playing Back A File - JVC DD-3 Instructions Manual

Basic operations of disc/file playback (continued)

Playing back a file

This part explains playing back 1) files recorded on
the loaded disc, and 2) files recorded on a USB
mass storage class device connected to the main
unit. The operation is explained with a display of
MP3 files as an example.
NOTE
• When files of different types are recorded on a
disc or connected USB mass storage class
device, select the file type before playback.
(Refer to "FILE TYPE" on page 38.)
1
Prepare the system for file
playback by following the
operations below.
■When you want to play back files on a disc
Place a disc on the disc tray.
• Refer to steps 1 and 2 on page 22.
■When you want to play back files on a USB
mass storage class device
Connect the USB mass storage class
device to the [USB] terminal on the
front of the main unit.
Main unit (front view)
Flash memory device, portable
digital audio player or other USB
mass storage class device
NOTE
• Copyrighted files cannot be played back.
• This system cannot recognize a USB mass stor-
age class device whose rating exceeds 5V/
500mA.
• When connecting a USB mass storage class
device, refer also to its manual.
• When using a USB cable for connecting a USB
mass storage class device, its length should be
less than 1 m (3'3").
• Connect a USB mass storage class device
directly to the main unit without routing through a
USB hub. Otherwise a malfunction may occur.
• Before disconnecting the USB mass storage
class device, make sure that playback is
stopped.
23
• The main unit does not charge a USB mass stor-
age class device connected to the [USB] termi-
nal.
2
Press [DVD/CD 3] or [USB 3].
NOTE
• You can also use the buttons on the main unit.
Repeatedly pressing [SOURCE] can select the
disc/file as the source, and pressing 3 starts
playback.
• If you select another source while "READING" is
displayed in the display window, sound is not
produced until reading of the files is finished.
3
Press 7 to stop playback.
• The menu screen appears on the TV
screen.
When a file recorded on the connected USB mass
storage class device is selected as the source,
"USB" is displayed.
Numbers of the current group and total groups
recorded on the loaded disc or connected USB
mass storage class device
Numbers of the current track (file)
and total tracks (files) included in the
current group
Elapsed playback time of the
current track (MP3/WMA/WAV
file only)
Number of the total tracks
(files) recorded on the loaded
disc or connected USB mass
storage class device
Current track (file)
Tag information (MP3/WMA file only)
Current group
Playback status