JVC DD-3 Instructions Manual page 151

General flow chart for the network function
Set up the system following the flow chart shown below. The procedure for setting up the system differs
depending on your usage environment.
Connect the main unit to the router connected to your computer.
Install CyberLink Media Server to your computer.
Specify the shared folders.
Start CyberLink Media Server, and then make sure that the main unit
recognizes CyberLink Media Server.
The IP address is assigned auto-
matically using the DHCP func-
tion of the router.
The setup is complete.
Now you can enjoy playback of files stored on the computer!
NOTE
• To connect the main unit to the computer directly, refer to "Connecting the main unit to the computer directly"
on page 19.
Does the main unit recognize
CyberLink Media Server?
Yes
Make sure that the main unit
is turned on.
Check the cable connection.
Does the main unit recognize
Yes
The IP address has to be set up
manually.
Exit CyberLink Media Server.
Find out the IP address of your
computer.
Assign the IP address to the main
unit.
No
CyberLink Media Server?
Page 16
Page 6
Page 7
Page 8
Page 9
Page 10
No
Page 10
Page 11
Page 13
4