Sharpening The Voice Sound; Adjusting The Bass/Treble Sound; Adjusting The Volume Of The Center Surround Speaker/Subwoofer; Adjusting The Volume Balance Between The Left And Right Speakers - JVC DD-3 Instructions Manual

Basic operations (continued)

Sharpening the voice sound

This function allows you to easily understand dia-
log recorded on the disc/file even with the volume
down low.
Press [CLEAR VOICE].
• Each time you press [CLEAR VOICE], the clear
voice function turns on and off.
This indicator lights up when the
clear voice function is activated.
NOTE
• This function is effective when receiving the cen-
ter channel signal with surround sound, or when
the surround mode is activated even with stereo
sound (refer to page 33).
Adjusting the bass/treble
sound
1
Press [BASS/TREBLE] repeatedly
to select "BASS" or "TREBLE" in
the display window.
2
Press [+] or [–] to adjust the sound
quality.
• Adjustable sound quality is from
17
Adjusting the volume of the
center surround speaker/
subwoofer
1
Press [CH LEVEL] to repeatedly
select "SURR" (the center sur-
round speaker) or "SUBWFR" (the
subwoofer) in the display window.
2
Press [+] or [–] to adjust the vol-
ume.
NOTE
• Adjustable volume range is from
Adjusting the volume balance
between the left and right
speakers
1
Press [SETTING].
2
Press 5 or / to display "BAL: " in
the display window.
3
Press 2 or 3 to adjust the volume
balance.
5 to +5.
–
• "CENTER" (the initial setting) is displayed
• You can adjust the volume range respec-
when the volume of the left and right speak-
ers are the same.
tively for the left and right speakers. Adjust-
able volume range is from
6 to +6.
–
21 to 1.
– –