Changing The Display Brightness - JVC RX-ES1SL Instructions Manual

Basic operations

Changing the display brightness

You can dim the display.
Press DIMMER repeatedly.
• Each time you press the button, the indication changes as follow:
DIMMER SETTING ADJUST SURROUND
DVD MULTI
STANDBY / ON STANDBY
DIMMER 1: • Dims the display slightly.
• Dims the blue indication lighting source lamps.
DIMMER 2: • Dims the display more than DIMMER 1.
• Dims the blue indication lighting source lamps
(same as DIMMER 1).
DIMMER 3: Turns off the display and the blue indication
lighting source lamps.
DIMMER OFF: Cancels the dim (normal display).
NOTES
• When setting speakers and basic items or adjusting sound, select
"DIMMER OFF" to confirm the setting you make on the display.
• When selecting DVD or DVD MULTI as a source using the remote
control, DIMMER does not function. To dim the display and
indication on the receiver, select a source except DVD or DVD
MULTI on the remote control, and then press DIMMER.
14
AUDIO SUBTITLE TITLE/GROUP RETURN
ZOOM BASS TREBLE
1 2 3
PROGRESSIVE BASS TREBLE
VFP 4 5 6
7 8 9
ANGLE TV RETURN 100 +
DVD DBS VCR
10 0
REPEAT
3D
DIMMER SLEEP ANALOG/DIGITAL CANCEL
INPUT
SMART S. SETUP BASS BOOST A.POSITION
TONE
SURROUND
EFFECT DECODE
TEST
SUBWFR CENTER L SURR R
Basic adjustment of auto memory
This receiver memorizes sound settings for each source:
• when you turn off the power,
• when you change the source, and
• when you change the analog/digital input mode (see page 11).
When you change the source, the memorized settings for the
newly selected source are automatically recalled.
The following can be stored for each source:
• Analog/digital input mode (see page 11)
• Tone adjustment (see page 21)
• Subwoofer output level (see page 21)
• Bass boost (see page 22)
• Input attenuator mode (see page 22)
• Balance (see page 22)
• Subwoofer audio position (see page 22)
• Surround/DSP mode selection (see pages 25 – 30)
NOTES
• If the source is FM or AM, you can assign a different setting for
each band.
• You cannot assign and store different settings for digital input
mode and analog input mode.
Signal and speaker indicators on the display
Signal indicators
L C R
ANALOG
L
LPCM
LFE
SUBWFR LFE
DOLBY D
LS
DTS
LS S RS
The following signal indicators light up —:
L: • When digital input is selected: Lights up when the left
channel signal comes in.
• When analog input is selected: Always lights up.
R: • When digital input is selected: Lights up when the right
channel signal comes in.
• When analog input is selected: Always lights up.
C: Lights up when the center channel signal comes in.
LS: Lights up when the left surround channel signal comes in.
RS: Lights up when the right surround channel signal comes in.
S: Lights up when the monaural surround channel signal
comes in.
LFE: Lights up when the LFE channel signal comes in.
The speaker indicators light up as follows:
SUBWFR
• The subwoofer indicator (
set to "USE" for Quick Setup (see page 16) or to "YES" for
Manual Setup (see page 17).
• The other speaker indicators light up only when the
corresponding speaker is set to "SML" or "LRG," and also when
required for the current playback.
Speaker indicators
L C R
PL ΙΙ
C R
DSP HP
SUBWFR
AUTO SR
S RS
INPUT ATT
LS RS
) lights up when "SUBWFR" is