Kit Inspection; Kit Contents - GREAT PLANES Reactor Instruction Manual

Before starting to build, take an inventory of this kit to make sure it is complete, and inspect the parts to make sure they
are of acceptable quality. If any parts are missing or are not of acceptable quality, or if you need assistance with assembly,
contact Product Support. When reporting defective or missing parts, use the part names exactly as they are written in
the Kit Contents list.
11
2
3
4
Tail Wheel Assembly
2-1/4" [57mm] Red Spinner Assembly
Wood Anti-Rotation Dowels (4)
Plywood Throttle Servo Tray
Plywood Throttle Servo Adapter Plates (2)
Plywood Outer Pushrod Tube Clip
1/4"x1/4"x12" [6x6x305mm] Balsa Stick
Battery Hatch Door
6mm Diameter Magnets (8)
2-5/64"x2-3/4"x5/64" [53x71.5x2mm]
Cooling Hole Coverplate
18" [457mm] Hook & Loop Strap
6" [150mm] Adhesive-Backed Hook &
Loop Material
3x8mm Round Head Machine Screws (4)
Large Control Horns (5)

KIT INSPECTION

Great Planes Product Support
3002 N. Apollo Drive, Suite 1
Champaign, IL 61822
Telephone: (217) 398-8970, ext. 5
Fax: (217) 398-7721
E-mail: airsupport@greatplanes.com

KIT CONTENTS

10
9
7
5
13
1
12
Kit Contents (Not Photographed)
12" [305mm] 2-56 Threaded One-End
Pushrods (5)
2-56 Faslinks (5)
#2x1/2" [13mm] Phillips Screws (10)
Silicone Clevis Retainers (6)
Nylon Clevises 2-56 (6)
6-32x1/2" [13mm] SHCS (4)
.40-.70 Nylon Engine Mount Halves (2)
#6 Flat Washers (12)
#6 Lock Washers (12)
6-32 Blind Nuts (4)
4-40x1/2" [13mm] SHCS (4)
#4 Flat Washers (4)
6-32x3/4" [19mm] SHCS (8)
#2 x 3/8" [9.5mm] Phillips Screws (10)
#2 Flat Washers (10)
1. Wing Halves (Left & Right)
2. Main Landing Gear (Left & Right)
3. Wheel Pants (Left & Right)
4. Main Wheels (2)
5. Fuel Tank
8
6. Aluminum Wing Tube
6
7. Horizontal Stabilizer
8. Rudder
9. Fuselage
10. Canopy
11. Cowl
12. Ailerons (Left & Right)
13. Elevators (Left & Right)
2x9" [51x229mm] CA Hinge Strip
5/32"x1-1/4" [4x32mm] Axles (2)
Large Axle Nuts 5/16"–24 (2)
5/32" [4mm] Wheel Collars (4)
6-32 Set Screws (4)
4-40x3/8" [9.5mm] Machine Screws (4)
#4 Lock Washers (4)
Aluminum Fuel Line Plug
36" [914mm] 2-56 Threaded One-End
3/8" [9.5mm] Black Heat Shrink Tubing (3)
Brass Screw-Lock Connector
Brass Screw-Lock Connector Retainer
4-40x1/8" [3mm] SHCS
Outer Pushrod Tube 36" [914mm]
6
Kit Contents
Pushrod