Assigning Functions To Keys - Siemens HiPath 3000 Opearting Instructions

Saving Station Numbers, Functions, Procedures and Appointments
Step by Step
US: Next?
UK: Next entry?
US: Change?
UK: Change entry?
Delete?
US: Exit
UK: End
Program/Service
* 91=Prog. feature key?
US: Change key?
UK: Change feature?
US: Save incomplete
UK: Store incomplete text
US: Exit?
UK: End?
US: Another key?
UK: Program another key?
54
Confirm.
or
Select and confirm.
or
Select and confirm.
or
Select and confirm.

Assigning Functions to Keys

Press the key. The LED lights up.
Select and confirm.
or
FB:
Enter the code.
Press the key. If the key is already in use, its assignment
appears on the screen.
Confirm.
Select and confirm the function, such as "Do not dis-
turb".
All programmable functions appear on the screen. See
Quick-Reference Operating Instructions (Appendix):
section ... about function keys.
If applicable
Select and confirm.
Some functions (such as "Call forwarding") accept in-
complete entries. This means you have to add more dig-
its later on when you activate the function by pressing
a key.
Confirm.
or
Select and confirm.
Now press the key to access the function direct-
ly. If the function can be turned on and off,
such as "Do not disturb", pressing the key multi-
ple times turns the function on and off.