Preface - DeDietrich 310 ECO Series Installation And Operating Manual

De Dietrich Gas 310/610 ECO

PREFACE

Read these instructions carefully, before putting the boiler into operation, familiarize your-self with its
control functions, operation and strictly observe the instructions given. Failure to do so may invalidate
warranty or prevent the boiler from operating.
The Installation and commissioning of the boiler needs to be performed by a licensed and trained heating
contractor. A complete commissioning report must be performed, recorded and sent to DDR Americas
Inc. for successfully active the product warranty, the startup report and any service records will be
requested when any warranty claims are made.
If you have any questions or require more information about specific subjects relating to this boiler or its
installation please do not hesitate to contact us.
The data published in these technical instructions is based on the latest information (at date of
publication) and may be subject to revisions.
We reserve all the right to continuous development in both design and manufacture, therefore any
changes to the technology employed may not be retrospective nor may we be obliged to adjust earlier
supplies accordingly.
Fig 01 – Gas 310 ECO 3D. Gas 610 ECO consists of one Gas 310-L (left hand) and one Gas 310-R (right hand).
5