Quotation Specifications; Delivery Options - DeDietrich 310 ECO Series Installation And Operating Manual

4.3 GAS 310 ECO QUOTATION SPECIFICATION:

Fully assembled cast aluminum floor
standing sectional hot water boiler.

Premix burner with stainless steel
cylinder with perforated holes for precise
air-fuel mixture and velocity with a
stainless tube with woven steel fiber for
stable flame and heat insulation.

Fully condensing boiler.

ASME approved design, CRN for each
Canadian Province.

Precise air to fuel ratio through firing
range with high turn down 5:1.

Boiler comes complete with a digital
combination flame safe guard and a
boiler control, with comprehensive
operating, service and fault diagnostic
capabilities.

Firing capabilities, ON-Off, 2-stage or
fully modulating [0-10v].

Capable of receiving BMS control.

Local-remote control [enable/disable].

Boiler control equipment communication
socket for PC or PDA device used with
OEM software for advanced service and
trouble-shooting diagnostics.

A = Control facing short side or (front)

I = Service side (right or left hand
execution)
4.4 Delivery & ordering options:

Available in 5 models

Left or right service side option

2 stage or modulating control

Weather compensator control

Condensate neutralization
system with or without pump

Multiple (Cascade) boiler control

DHW production kit

Vent damper [required for co-
venting]

Pressure transducer for system
pressure

Low & High gas pressure switch

Gas valve proofing system

Secondary (CSD-1 compliant) Low water cut-off control

Safety relief valve according to system pressure

Combustion air filter

Cleaning tool
Consult factory DDR Americas Inc. [De Dietrich Boilers] for other available options, all orders must specify
if optional controls are to be installed or shipped loose.
De Dietrich Gas 310/610 ECO

Available for conventional chimney with
room or direct vent, CLV and sidewall
vented venting systems.

Fully factory pressure and fire tested.

Distinctive powder coasted enamel steel
removable casing.

Rigid steel boiler frame with castors for
easy maneuvering into boiler's final
position.

Certified by CSA for USA and Canadian
markets.

High combustion and thermal
efficiencies.

No proven water flow requirements.

No minimum temperature requirements.

Manufactured in an ISO 9001 certified
facility.

Max 100 psi - System water operating
pressure

ASME safety relief valve

Pressure & Temperature gauge

Optional communication protocol
gateway (LonWorks®, BACnet®, etc...)

Lead/lag (cascade) system manager for
up to 8 boilers, space heating pump, 2
mixing valve circuits, 2 mixing valve
pumps, DHW pump.
16