Table of Contents
Advertisement
KTD-00781-A
3.11.2
USB Connector 6/7 (USB6/7)
USB Ports 6 and 7 are mounted together with ETHER2 Ethernet port.
Pull
Note
Ioh/Iol
U/D
1
-
-
/15K
0.25/2
1
-
-
/15K
0.25/2
Note 1: In order to meet the requirements of USB standard, the 5V input supply must be at least 5.00V.
Signal
Description
Differential pair works as Data/Address/Command Bus.
USB6+ USB6-
USB7+ USB7-
5V supply for external devices. SB5V is supplied during powerdown to allow wakeup on
5V/SB5V
USB device activity. Protected by resettable 1.1A fuse covering both USB ports.
3.11.3
USB Connector 0/1 (USB0/1)
USB Ports 0 and 1 are supplied on the internal USB0/USB1 pinrow connector.
Pull
Note
Ioh/Iol Type
U/D
1
-
-
-
Note 1: In order to meet the requirements of USB standard, the 5V input supply must be at least 5.00V.
Signal
Description
Differential pair works as Data/Address/Command Bus.
USB0+ USB0-
USB1+ USB1-
5V/SB5V
5V supply for external devices. SB5V is supplied during powerdown to allow wakeup on
USB device activity. Protected by resettable 1.1A fuse covering both USB ports.
3.11.4
USB Connector 2/3 (USB2/3)
See Frontpanel Connector (FRONTPNL) description.
KTG41 family
Type
Signal
PWR
5V/SB5V
1
IO
USB7-
PWR
5V/SB5V
1
IO
USB6-
Signal
-
PWR 5V/SB5V
1 2
-
IO
USB0-
3 4
IO
USB0+
5 6
PWR
GND
7 8
-
KEY
9 10
PIN
Signal
Type
2
3
4
GND
PWR
USB7+
IO
2
3
4
GND
PWR
USB6+
IO
PIN
Signal
Type Ioh/Iol
5V/SB5V PWR
USB1-
IO
USB1+
IO
GND
PWR
NC
Page 37 of 78
Pull
Ioh/Iol
Note
U/D
-
-
0.25/2
/15K
-
-
0.25/2
/15K
Pull
Note
U/D
-
1
-
-
-
-
-
www.kontron.com
Advertisement
Table of Contents
