Advanced Chipset Settings - North Bridge Chipset Configuration - Kontron KTG41/ATXu User Manual

KTD-00781-A
6.9.1 Advanced Chipset Settings – North Bridge Chipset Configuration
North Bridge Chipset Configuration
Memory Remap Feature
PCI MMIO Allocation: 4GB to 3328MB
Memory Hole
Initial Graphics Adaptor
IGD Graphics Mode Select
IGD GTT Graphic smemory size
PAVP Mode Mode
PEG Port Configuration
PEG Port
► Video Function Configuration
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
Feature
Memory Remap Feature
Memory Hole
Initial Graphics Adaptor
IGD Graphics Mode Select
PAVP Mode
PEG Port
KTG41 family
BIOS SETUP UTILITY
Chipset
[Disabled]
[Disabled]
[PEG/IGD]
[Enabled,32MB]
[No VT mode, 2MB]
[Disabled]
[Auto]
Options Description
ENABLE: Allow remapping of overlapped PCI
Disabled
Enabled memory above the total physical memory.
Disable: Do not allow remapping of memory
Disabled Disabled
15MB-16MB 15MB-16MB
IGD Select which graphics controller to use as the
PCI/IGD primary boot device.
PCI/PEG
PEG/IGD
PEG/PCI
Disabled Select the amount of system memory used by the
Integrated Graphic Device.
Enabled, 32MB
Enabled, 64MB
Enabled, 128MB
GMCH Protected Audio Video Path(PAVP) BIOS
Disabled
Lite support.
High
Auto
Auto
Disabled Disabled
Page 73 of 78
ENABLE: Allow remapping
of overlapped PCI memory
above the total physical
memory.
Disable: Do not allow
remapping of memory
<-> Select Screen
|| Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
www.kontron.com