Usb Connector 4/5 (Usb4/5); Usb Connector 6/7 (Usb6/7) - Kontron KT690/mITX User Manual

KTD-00738-0
4.12.2

USB Connector 4/5 (USB4/5)

USB Ports 4 and 5 are are supplied on the combined ETHER2, USB4, USB5 connector.
Pull
Note U/D Ioh/Iol
1 - -
/15K 0.25/2
1 - -
/15K 0.25/2
Note 1: The 5V supply for the USB devices is on-board fused with a 2.0A reset-able fuse. The supply is
common for the two channels. SB5V is supplied during power down to allow wakeup on USB device activity.
In order to meet the requirements of USB standard, the 5V input supply must be at least 5.00V.
Signal Description
Differential pair works as Data/Address/Command Bus.
USB4+ USB4-
USB5+ USB5-
USB5V 5V supply for external devices. Fused with 2.0A reset-able fuse.
4.12.3

USB Connector 6/7 (USB6/7)

USB Ports 6 and 7 are are supplied on the internal USB6, USB7 pinrow connector.
Pull
Note U/D Ioh/Iol
1 -
-
-
-
- -
Signal Description
Differential pair works as Data/Address/Command Bus.
USB6+ USB6-
USB7+ USB7-
USB5V 5V supply for external devices. Fused with 2.0A reset-able fuse.
Note 1: The 5V supply for the USB devices is on-board fused with a 2.0A reset-able fuse. The supply is
common for the two channels. SB5V is supplied during power down to allow wakeup on USB device activity.
In order to meet the requirements of USB standard, the 5V input supply must be at least 5.00V.
KT690 Family
Public User Manual
Type Signal
1
PWR 5V/SB5V
IO USB4-
1
PWR 5V/SB5V
IO USB5-
Type Signal
PWR 5V/SB5V
IO USB6-
IO USB6+
PWR GND
KEY
Date: 2007-12-13
PIN Signal
2 3 4
GND
USB4+
2 3 4
GND
USB5+
PIN
Signal
1 2 5V/SB5V
3 4 USB7-
5 6 USB7+
7 8 GND
9 10 NC
Page 40 of 60
Pull
Type Ioh/Iol U/D
PWR - -
IO 0.25/2 /15K
PWR - -
IO 0.25/2 /15K
Pull
Type Ioh/Iol U/D
PWR -
IO -
IO -
PWR -
- -
Note
Note
1