Wireless Configuration - NetComm NB9 User Giude

Wireless Configuration

To enter advanced settings for the wireless network hosted by the NB9W, click on Wireless >
Configuration:
Many of these fields may not need to be altered and may require interpretation by a network
engineer.
Field Name
AP Isolation
Band
Channel
Rate
Multicast Rate
38
YML790 Rev1
About
'On': 'wireless clients associated with the access
point will only be able to communicate with the
Access Point
'Off': wireless clients associated with the Access
Point will be able to connect to each other 'peer-to-
peer
[Not alterable by end-user]
The default channel is 11. The 802.11b/g network is
divided into 14 channels in Australia. Each channel
broadcasts on a slightly different frequency; if you
are getting interference from adjacent wireless
networks, make a note of the channels that these are
operating on and change your channel accordingly.
Default rate is 'Auto' and operates at the 54 Mbps
data rate when possible but drops to lower rates
when necessary, dependent on signal strength and the
capacity of the client stations.
Leave at default setting 'Auto' unless there is a
specific requirement for multicast.
NB9/NB9W ADSL2+ VoIP Router