NetComm NB9 User Giude page 29

RFC2833 Outband DTMF
RTP Payload Type for RFC2833
Enable FXS Hotline (1&2)
Enable Trusted IP for SIP servers [Not implemented in this product version]
Remote Server for SIP Message
Once you have input these settings, click Apply and Save VoIP Parameters which will save your
settings and attempt to register the NB9/NB9W with your VSP.
Click on Basic>Home to check the status of your VoIP service. In the Basic-Status window, you will
see the following status indicators:
VoIP Status Indicator
Direct Mode
SIP Registration Fail
SIP Registration Success
NB9/NB9W ADSL2+ VoIP Router
YML790 Rev1
Value recommended by your VSP; default is Auto
Negotiation
Value recommended by your VSP; default is 96
Hotline function will automatically connect to a
stipulated VoIP or PSTN phone number; if the box
is checked and a number is entered, the nominated
phone will ring as soon as the handset is lifted.
Means
VoIP is available but you are not connected to a SIP
service. You are only able to make VoIP calls by
entering IP details of remote device.
Usually indicates Invalid VoIP/SIP User ID and
Password (= VoIP phone number and Authorisation
Code). Check VoIP entries and try again.
Connected to VSP; ready for VoIP phone calls. In this
case you will hear a normal dial-tone.
29