NetComm NB9 User Giude page 20

10. DispName: This is the user-defined 'extension number' that will display on the other
phone connected to the NB9/NB9W;
11. VoIP Phone Number: issued by VSP
12. AuthID: same as above
13. Auth. Password: VoIP password issued by VSP
14. Once VoIP settings have been entered, click on Apply and Save all VoIP Parameters.
15. Once your SIP client has started, click on the 'Basic > Home' to see what the status of
your Voice service is:
16. Pick up your telephone, make sure you have dial tone and can make a call.
Note: If you experience any failure in setting up your VoIP, please refer to the
section entitled "Digging Deeper - Advanced Settings" in this User Guide
for more information.
20
YML790 Rev1
NB9/NB9W ADSL2+ VoIP Router