Quick Security Setup 2 – WPA-PSK
If an stronger network security setting is required, go to Wireless>Security and select WPA-
PSK from the drop-down menu. Enter a Network Key of your own choice; this can be from
8 to 63 characters and contain special characters and spaces.
Select TKIP from WPA encryption
Leave WEP as disabled.
Users wishing to connect to your network will need to know the SSID name and the WPA
Pre-Shared Key.
Note:
Wireless client network cards must be WPA-compliant to connect
to your network; if in doubt check the wireless client network card
documentation, or use WEP security (above).
NB9/NB9W ADSL2+ VoIP Router
YML790 Rev1
33