Enterasys Matrix N7 7C107 Installation Manual page 41

3. Unplug the power cords
4. Unplug the power cord
5. Unscrew the captive slotted-head screw
6. To remove the power supply
supply straight out of the chassis, then place it on an antistatic surface or in an antistatic bag for
future use.
CAUTION: If you plan to operate the chassis with only one power supply, make sure to
install a coverplate (similar to
radiation.
Figure 3-8 Removing a Power Supply from a Powered-Up Chassis
Ä
POWER FAN
➀
Power switch
➁
AC power cord
➂
15A/120 Vac power outlet
➁
from each dedicated 15A/120 Vac outlet
➁
from the ac power connectors
➅
➄
from the chassis
➈
) in place of the removed power supply to contain EMI
Æ Ç
LINE 2:
100-125V~12A
200-240V~6A
50/60Hz
POWER FAN
LINE 1:
100-125V~10A
200-240V~5A
50/60Hz
PS1
➃
AC power connector
➄
Power supply
➅
Captive slotted-head screw
Setting Up the Matrix N7 Chassis
➃
of the power supply
to release the power supply
➆
, grasp the handle
Å À
LINE 2:
100-125V~12A
200-240V~6A
50/60Hz
Ã
LINE 1:
100-125V~10A
200-240V~5A
50/60Hz
PS2
Â
➆
N7 chassis
➇
Power supply handle
➈
Example of blank plate
Matrix N7 Chassis Setup
➂
.
➄
.
➄
from the chassis
➇
and pull the power
È
Á
3-13
➆
.