11
SERVICE WORK ON THE CHASSIS
11.20
Removing the seat
11.21
Mounting the seat
11.22
Removing the air filter box lid
–
Remove screw
above.
101683-10
–
Hook in the front of the seat at the collar bushing of the fuel tank, lower at the rear
and simultaneously push forward.
–
Make sure that the seat is correctly locked in.
L00950-01
–
Mount and tighten screw
Guideline
Remaining screws, chassis
101683-10
Condition
The air filter box lid is secured.
–
Remove screws
B02101-10
–
Pull off the air filter box lid in area
B02101-11
. Lift up the seat at the rear, pull it back and then remove from
of the seat fixation.
.
sideways and remove it toward the front.
M6
10 Nm (7.4 lbf ft)
48