Table of Contents
Advertisement
11
SERVICE WORK ON THE CHASSIS
11.45
Checking/correcting the fluid level of the hydraulic clutch
Info
The fluid level rises with increasing wear of the clutch lining discs.
(All 250/300 models)
–
Adjust the basic setting of the clutch lever to your hand size by turning adjust-
ing screw
L01224-10
(125/150 SX)
–
Move the clutch fluid reservoir mounted on the handlebar to a horizontal posi-
tion.
–
Remove screws
–
Remove cover
–
Check the fluid level.
Fluid level under top edge of con-
tainer
L00953-10
»
If the level of the fluid does not meet specifications:
–
–
Position the cover with the membrane. Mount and tighten the screws.
(All 250/300 models)
–
Move the clutch fluid reservoir mounted on the handlebar to a horizontal posi-
tion.
–
Remove screws
–
Remove cover
–
Check the fluid level.
Fluid level under top edge of con-
tainer
L01222-10
»
If the level of the fluid does not meet specifications:
–
–
Position the cover with the membrane. Mount and tighten the screws.
Info
When the adjusting screw is turned counterclockwise, the clutch lever
moves away from the handlebar.
When the adjusting screw is turned clockwise, the clutch lever moves
closer to the handlebar.
The range of adjustment is limited.
Turn the adjusting screw by hand only, and do not apply any force.
Do not make any adjustments while riding!
.
Info
When the adjusting screw is turned counterclockwise, the clutch lever
moves closer to the handlebar.
When the adjusting screw is turned clockwise, the clutch lever moves
away from the handlebar.
The range of adjustment is limited.
Turn the adjusting screw by hand only, and do not apply any force.
Do not make any adjustments while riding!
.
with membrane
Correct the fluid level of the hydraulic clutch.
Hydraulic fluid (15) (
p. 120)
.
with membrane
Correct the fluid level of the hydraulic clutch.
Brake fluid DOT 4 / DOT 5.1 (
Info
Wash off overflowed or spilled brake fluid immediately with water.
.
4 mm (0.16 in)
.
4 mm (0.16 in)
p. 119)
60
Advertisement
Table of Contents
