Adjusting The Rebound Damping Of The Fork - KTM 125 SX EU 2015 Owner's Manual

10 TUNING THE CHASSIS
10.13

Adjusting the rebound damping of the fork

Info
The hydraulic rebound damping determines the fork suspension behavior.
(125 SX EU, 150 SX EU, 250 SX EU)
–
Remove protection caps
–
Turn adjusting screws
–
Turn counterclockwise by the number of clicks corresponding to the fork type.
B02083-10
Guideline
Rebound damping (125 SX EU, 150 SX EU)
Comfort
Standard
Sport
Rebound damping (250 SX EU)
Comfort
Standard
Sport
–
Mount protection caps
(All XC models, 125 SX US, 150 SX US, 250 SX US)
–
Turn the red adjusting screw
–
Turn counterclockwise by the number of clicks corresponding to the fork type.
B02084-10
Guideline
Rebound damping (125 SX US, 150 SX US)
Comfort
Standard
Sport
Rebound damping (250 SX US)
Comfort
Standard
Sport
Rebound damping (All XC models)
Comfort
Standard
Sport

.

clockwise all the way.
Info
Adjusting screws  are located at the bottom end of the fork legs.
Make the same adjustment on both fork legs.
Info
Turn clockwise to increase damping; turn counterclockwise to reduce
damping.

.

all the way clockwise.
Info

Adjusting screw is located at the upper end of the right fork leg.
The rebound damping is located in the right fork leg REB (red adjusting
screw). The compression damping is located in the left fork leg COMP
(white adjusting screw).
Info
Turn clockwise to increase damping; turn counterclockwise to reduce
damping.
14 clicks
12 clicks
10 clicks
14 clicks
12 clicks
10 clicks
17 clicks
15 clicks
13 clicks
17 clicks
15 clicks
13 clicks
17 clicks
15 clicks
13 clicks
37