Making a connection
Connecting with a cable
To connect to the internet/router with a cable follow these steps:
Step 1
Step 2
Step 3
Step 4
Plug one end of the Ethernet cable (Cat 5e) provided into one of the yellow
Ethernet ports marked LAN 1 – LAN 4 on the back of the router and the
other end to the Ethernet port on your computer.
Wait for the connection to be made – this should take about 30 seconds.
Check the corresponding Ethernet LED on the front of the router
has lit up. If it's solid then you're connected. If not please refer to the
Troubleshooting section.
Open your browser (e.g. internet Explorer/Firefox/Safari) and start
browsing the internet.
7