Installing Your Router - NetComm NB604N User Manual

Installing your router

Once you've worked out where you want to put your router it's time to connect it. Before you do
make sure any devices plugged into your phone line (handsets, fax machines, cable television, back
to base alarm systems) have a central splitter or ADSL filter/splitter (you'll find this in the box with
your router) fitted between them and the telephone socket.
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Connect the power adaptor cable to the Power socket on the back of the
router and plug the adaptor into a power point.
Plug the ADSL2+ filter/splitter provided with the router into your
telephone wall socket.
Next, take the telephone cable (RJ-11) provided and plug one end into
the filter/splitter and the other end into the DSL port on the back of
your router.
Press the On/Off button to turn the router on and wait while the router
powers up – this should take about 60 seconds.
Check that both the DSL and Internet LEDs on the front have lit up. If
they're solid then your router is connected to the internet. If not please
refer to the Troubleshooting section.
Now you can connect your computer with a cable or wirelessly.
6