Ping Tx Address - Konica Minolta BIZHUB 500 User Manual
Network scanner operations
Hide thumbs
Also See for BIZHUB 500:
- Service manual (958 pages) ,
- User manual (794 pages) ,
- Shortcut manual (24 pages)
Table of Contents
Advertisement
Specifying Settings From the Control Panel
PING TX Address
The host address of the device to ping can be specified.
1
In the PING Confirmation screen, touch [Host Address].
The Host Address screen appears.
2
Touch [IP Address Input] or [Host Name Input].
–
To specify the host address with the IP address, touch [IP Address
Input].
–
To specify the host address with the host name, touch [Host Name
Input].
3
Enter the host address (IP address (1.0.0.0 to 126.255.255.255 or
128.0.0.0 to 223.255.255.255) or host name (up to 255 characters)).
–
To edit the values that you entered with "IP Address Input", touch
[
and enter the new value.
–
To clear all values, press the [C] (clear) key.
–
If the host address exceeds 81 characters, touch [Details] to display
the Host Address Detail screen with the rest of the host addresses.
4
Touch [OK].
The PING TX address is set.
bizhub 500/420
] or [
] to move the cursor to the desired area, touch [Delete],
4
4-105
Advertisement
Table of Contents
