Chapter 5 Appendix - Pro-face GP-2500 Series Replacement Manualbook

Chapter 5 Appendix

5.1 Changing the setting of the external media to use
If a CF card has been used for GP-PRO/PBIII, after GP2000 series is replaced with
GP4000 series with GP-Pro EX, "a CF card" is automatically replaced with "a SD card"
for the external media setting.
(1) After conversion of the project file data, at GP-Pro EX Error Check,
if the message, "The project contains features that require a SD card. However,
the selected display does not support SD cards so these features will not run."
appears,
<Cause>
The model without a SD card slot has the setting that uses a SD card.
->Solution 1
(2) To use a USB storage device instead of a SD card
(3) To check or change the SD card's data output destination folder setting
->Solution 2
->Solution 1
59/61