P Reparation - Pro-face GP-2500 Series Replacement Manualbook

3.2 Preparation
Requirements for
receiving screen data
from GP2000 series.
*1
Requirements for
converting screen
data of GP2000
series and
transferring the
converted data to
GP4000 series
*1: This step is required if screen data is saved only in the GP unit, not in any other device.
*2: Please use the same version or later as or than that of the software used during creating screens on
GP2000 series. If you don't know the version, we recommend you to use the newest version. The
newest version is GP-PRO/PBIII for Windows C-Package03 (SP2) V7.29. Those who have
GP-PRO/PBIII for Windows C-Package03 V7.0 can download it from our web site called [OtasukePro!]
(http://www.pro-face.com/otasuke/).
*3: GPW-CB03 is supported by GP-PRO/PBIII for Windows C-Package02(SP2)V6.23 or later. You need to
install a driver from [Download] on our Web site called [OtasukePro!]
(http://www.pro-face.com/otasuke/).
GP-2500S/L, GP-2501T/S:
PC in which GP-PRO/PBIII for Windows C-Package02 V6.0 or
later is installed. *2
GP-2601T, GP-2501L:
PC in which GP-PRO/PBIII for Windows C-Package02 V6.3 or
lateris installed. *2
Transfer Cable (The following three types of cables are
available.)
・ GPW-CB02 9 pin D-sub to PC
・ GPW-CB03 USB to PC
・ GP430-CU02-M or GPW-SET 25 pin D-sub to PC
*For GP2000 series, it's possible to send/receive a screen
with a CF card or on Ethernet (for GP2500S/L only)
PC in which GP-Pro EX Ver.3.01 or later is installed.
Transfer Cable (The following three types of cables are
available.)
・ A USB transfer cable (model: CA3-USBCB-01)
・ A USB data-transfer cable (model: ZC9USCBMB1)
・ A commercial USB cable (USB Type A/mini B)
* Possible to send/receive a screen with a SD card (except
GP-4501TW), a USB storage device, or on Ethernet.
26/61
*3