Install Ceramic Logs (739Jl) - Valor LEGEND 739JLN Installation & Owner's Manual

QUALIFIED
INSTALLER

Install Ceramic Logs (739JL)

Unpack the ceramic logs very carefully to avoid damaging the fragile material. Install the logs as shown below. Please
note that the position of the logs is critical to ensure proper performance of the appliance.
1. Place the rear log on the sheet metal support
centering it side to side in the fi rebox. Pull it forward
until the notch in the underside of the log sits
against front edge of the sheet metal support.
Note: The rear log will appear slightly angled
backward on the left side compared to the burner.
The space between the log and the burner is
purposefully wider on the left than on the right.
Rear log support
Burner
26
Rear log outline
Burner
Top view
Installation
2. Place the top left log on the pin of the rear log. The
bottom of the log rests against the left of the pilot
shield and slightly above.
3. Place the front left log on the burner. Slide it to the
left against the top left log. The narrow end should
rest in the notch in the rear log.
Pilot area
Pilot area