Check Operation; Adjust Aeration (If Necessary); Install Front, Trim And Barrier Screen - Valor LEGEND 739JLN Installation & Owner's Manual

Check Operation

Turn the fi replace fl ame up and down using the
remote control to confi rm that the full range of inputs
is achieved—see the remote control operation
instructions on pages 9–13.

Adjust Aeration (if necessary)

Light the fi re and allow the unit to warm up for 10–15
minutes to evaluate the fl ame picture. Burners are
equipped with an adjustable shutter to control primary
aeration. See the fi gures below. The shutters are
factory-set to an aeration gap which will give optimum
performance for the vast majority of installations.
Air Shutters
NG Air Shutter
Slider & Cover

Install Front, Trim and Barrier Screen

Install the front and trim chosen by the customer for
their fi replace. Install as well the barrier screen which is
provided with the front.
Show the customer remove the front and also how to
access the controls when the front is installed.
Follow the instructions provided with the front et trim and
leave those instructions behind for the customer's further
reference.
Installation
NG
Close
Open
Close
Open
In a few unusual installations, the fl ame picture may
be improved by adjusting the aeration. The need for
adjustment should be determined only by operating the
appliance with the ceramic logs and window installed.
Increasing aeration (open) will cause the fl ames
to appear more transparent and blue showing more
ceramic effects glow.
Decreasing aeration (close) will cause the fl ames to
appear more yellow or orange showing less ceramic
effects glow.
Too little aeration may result in black carbon
forming and dropping into the fi rebox.
Flashback
shield (for
LPG only)
LPG Air Shutter
Slider
QUALIFIED
INSTALLER
LPG
Close
Open
31