Supply Gas; Pack Contents - Valor 534XAN Installation & Operating Instructions Manual

Heater engine unit #534XAN is used with all natural gas installations.
Heater engine unit #534XAP is used with all propane gas installations.
The supply pressure must be between the limits shown in the section Specifi cations of this manual.
The supply connection is ⅜" NPT.
The opening for the gas supply line is at the rear left corner of the appliance.
See fi gure 19
#534XAN or #534XAP Engine Unit
1 Appliance engine unit fi tted with window
1 Ceramic ash bed
5 Ceramic logs
1 Firebox ceramic rear wall
2 Firebox ceramic sidewalls
1 Port cover
2 Frame side fi xing brackets
1 Ash bed rear support
2 Restrictor plates type "A"
2 Restrictor plates type "B"
2 Restrictor plates type "C"
1 Gas inlet pipe connection adapter
1 Top heat shield panel with blanking plate
1 Frame top support angle
2 Stand-off brackets
2 Screws for wall switch plate
4 Screws for frame side fi xing brackets
2 Screws for top heat shield panel
3 Screws for frame top support angle
6 Screws for stand-off brackets
2 Screws for vent fi xing
4 Wood screws for fi xing appliance to studding
1 Deluxe remote control
#601SFB Standard Metal Front (alternative)
1 Upper louver unit
1 Lower louver unit
2 Side channels
2 Hinge studs
2 Hinge spacers
2 Magnet counter plates
#602CFB Cast Iron Front (alternative)
1 Top casting unit
1 Bottom casting unit
Take care when removing the contents from the packaging to prevent damage. Check that all the contents are in the
packs and are undamaged.

Supply Gas

Pack Contents

#551DVK Standard Horizontal Through-the-
Wall Vent Kit (alternative to other kit)
1 Vent pipe & terminal unit
2 Wall plates
2 Wall shields (supplied fl at)
12 Thread cutting screws
1 Styrofoam cutting support
8 Wood screws
8 Wall plugs
#755CFK Circulating Fan Kit (additional option)
Details are with the kit.
#603FSK Black or #604FSK Champagne
Three-Sided Trims (additional option)
1 Top trim
2 Side trims
2 Trim fi xing brackets
2 Corner connection plates
8 Grub screws for corner connections
10 Screws for side trims & engine attachment
#605FSK Black or #606FSK Champagne Four-
Sided Trims (additional option)
2 Top & bottom trims
2 Side trims
2 Trim fi xing brackets
4 Corner connection plates
16 Grub screws for corner connections
10 Screws for side trims & engine attachment
19 19