Mazda 6 Training Manual page 167

1 IG switch
2 SUS 15A fuse
3 ABS 60 A fuse
4 Meter
5 ABS warning light
6 Brake system warning light
7 DSC OFF light
8 DSC indicator light
9 CAN driver
10 Battery
11 Cruise actuator
12 DSC OFF switch
DSC INDICATOR LIGHT End Of Sie
Function
• The DSC indicator light is integrated in the instrument cluster and notifies the driver of DSC activation (vehicle
is in side slip situation) or TCS activation (drive-wheel slippage situation) when DSC has not been canceled by
pressing the DSC OFF switch.
Structure/Operation
• When the DSC and CAN system is normal, the DSC indicator light illuminates for 2.4 seconds when the
ignition switch is at ON, and goes out, checking the light function. When the system is malfunctioning, the DSC
indicator light remains illuminated.
• When DSC and TCS are operating, the DSC indicator light operates as follows:
DSC indicator light operation table
TCS, DSC non-operation
TCS operation
DSC operation
.
1 DSC indicator light
End Of Sie
DYNAMIC STABILITY CONTROL
Item
13 DLC-2
14 CAN-H
15 CAN-L
16 Wheel-speed sensor
17 Combine sensor
18 Steering angle sensor
19 Brake switch
20 Brake light
21 Back-up light switch (MTX only)
22 Back-up light
23 Audio unit, Wiper and washer switch,
Car-navegation unit, Auto leveling control unit
DSC indicator light
Not illuminated
Flashes (0.5 s intervals)
Flashes (0.5 s intervals)
A6E692067650T02
P
A6E6921T003
P–13