Outline; Outline Of Construction; Features - Mazda 6 Training Manual

OUTLINE OF CONSTRUCTION

• The construction and operation of the body electrical system is essentially carried over from that of the 626
(GF) model, ecept the following features.
End Of Sie

FEATURES

Improved Serviceability
• A controller area network (CAN) system has been adopted for communication between the PCM, ABS (ABS/
TCS) HU/CM or DSC HU/CM, and instrument cluster.
• Cruise actuator with built-in control module has been adopted.
Improved Marketability
• Headlight with built-in front fog light and front turn and parking light has been adopted.
• A projector type has been adopted to the headlight (low-beam) and front fog light.
• Stepped reflectors have been adopted to the rear combination lights and inboard combination lights.
• Information display has been adopted to instrument panel center.
• A vehicle-speed sensing type windshield wiper system has been adopted.
• Drive information system has been adopted to instrument cluster and information display
• Auto level control (ALC) function has been adopted to audio unit (base unit).
• Car-navigation system has been newly adopted.
Improved Security
• Theft-deterrent siren and intruder sensor have been adopted to theft-deterrent system.
• The current immobilizer unit function has been incorporated into the PCM as the passive anti-theft system
(PATS).
Design Improvement
• A center panel module, which integrates the audio control, climate control and other units, has been adopted.
Improved Safety
• 2-step deployment control has been added to the front air bag system (driver- and passenger-side) deployment
control.
• Curtain air bag module has been adopted.
Improved Visibility
• Discharge headlight have been adopted for the headlights (low beam). (For vehicles equipped with discharge
headlights.)
• A headlight auto leveling system has been adopted. (For vehicles equipped with discharge headlights.)
End Of Sie

OUTLINE

OUTLINE
A6E810201088T01
A6E810201088T02
T T
T–3